TestMarket - Limited Time Offer: SUNLU PETG 3D Printer Filament, High-Quality 1.75mm PETG 3D Filament, Save 15%, Now Only 16.14£

Limited Time Offer: SUNLU PETG 3D Printer Filament, High-Quality 1.75mm PETG 3D Filament, Save 15%, Now Only 16.14£

Date:
Jun 11, 2024 01:34 pm
Limited Time Offer: SUNLU PETG 3D Printer Filament, High-Quality 1.75mm PETG 3D Filament, Save 15%, Now Only 16.14£
Brand Name: ‎SUNLU
Category: Filament 3D Printing Materials
Seller Name: SUNLU 3D Official
Rating: 4.50
Total Rating Count: 3494
15.00
OFF
£18.99
£16.14
Saving £2.85
This item is sold on
Act Fast to Grab Yours! Shop now for the lowest prices on SUNLU PETG 3D Printer Filament. This high-quality filament offers good impact resistance and dimensional accuracy of +/- 0.02mm. Each 1kg spool (2.2lbs) contains 320 meters of neatly wound filament in white. Don't miss your chance to save 2.85£ on this exclusive deal. Hurry, limited stock available!

Title: The free shipping option was really fast which was awesome. It also came well packaged in an Amazon ...
Content: The free shipping option was really fast which was awesome. It also came well packaged in an Amazon box with padding, then in it's own box with details about the temperatures this should be printed at and also vacuum sealed which is awesome because PETG is quite sensitive to moisture. First off, the orange was a little darker than expecting but is still a nice colour. I used Cura 3.2.1 to slice all my prints and then printed out quite a few benchmarks, tweaked my settings then printed them out again (the pictures are of the tweaked prints), also i'm using a cheap Tevo Tarantula so if you have a more expensive printer expect better quality. The settings I ended up with were: - Hotend - 235 degrees Celsius - Bed - 70 degrees Celsius - Retraction - 4.25 mm and 40 mm/s - Speeds: Print 45 mm/s Infill 35 mm/s Wall 22 mm/s - Cooling 85 % (however I think I may have done something weird with my fans so this may actually be 42.5% not too sure) - Infill 10% I think this is an interesting material because it is relatively new to the 3D printing market and has a lot of potential as it combines the easy printability of PLA with the toughness and strength of ABS. So overall I think the print quality was pretty good, but it doesn't print as easily as PLA because it can warp without a heated bed and I have found it strings more. It is definitely less brittle than PLA though and it much more heat resistant. You are going to want to lower all the print speeds especially infill if you want it to be sturdy. Also some people say that having the nozzle further for PETG is good, but I've found when printing on glass you'll want it as close as you would with PLA to get a nice bottom surface finish (reducing the temperature of the nozzle slightly may prevent it from sticking to the nozzle). Bridging also wasn't as good as PLA in my experience, however this may just be down to my print settings. Whilst I could not directly compare the strength to that of PLA, it defiantly felt sturdy and tough. Overall I think it is a good material, easy enough to print with a few tweaks and can be used for a huge range of applications which PLA isn't suitable for (like mechanical parts, electronic housings, printer upgrades ( due to sturdiness and heat resistance) etc....
Rating:
Title: Great filament
Content: I needed to use a more suitable filament for outdoors use and as I had only had experience of PLA I tried the next set up. This PETG filament was no harder to use than PLA and I found it a breeze to set up. The job turned out perfectly and if possible better than I could have done with PLA. I would recommend you try it and I will be ordering more in tge future.
Rating:
Title: Flows well, but prone to stringing
Content: Used sunlu petg (black) to print 3d printer parts as well as a single big cubic part (~20x20x20cm). - reel winding: not the tidiest wound filament, but the whole roll unrolled fine. - stringing/blobbing: average-to-high for a PETG. Printing at 235-240C seemed to produce the cleanest results. Can turn messy really quickly though as it oozes easily (but then again, which PETG doesn't) - layer adhesion: no issues there, sticks nicely to itself - bed adhesion: no issues either, printed directly on PEI with bed at 80-85C, held well and separates reasonably easily once cooled down. - surface finish: nice black gloss, can be dulled a bit by tweaking the temperature/extrusion speed - does it jam: with a 0.4mm nozzle not a single jam - is it suitable for accuracy-critical work: I'd say yes for smaller stuff (the 3d printer parts came out just fine) HOWEVER, when printing big flat parts (>10cm) I observed some lifting/warping. Way better than I'd get with ABS on my setup, but I wouldn't recommend this for bigger precision parts. Maybe if I printed with an enclosure on...? - smell when printing: no smell noticed
Rating:
Title: My go to Pla
Content: This is my goto filament, choice of colours are great. Printing is easy once settings are dialled in. (Everyone's different based on location of printer) also planning on trying different types of filament they offer.
Rating:
Title: Good quality
Content: As usual this arrived quickly and well packaged
Rating:
Title: Neatly spooled
Content: I have been 3d printing since 2019 and Sunlu is one of my default choices when looking for filament online. The spool is tidy, never had a clogging issue and you can also use it in an AMS with no issues. So far I have only used their main colours for PLA and or Petg but they have all worked exactly as intended.
Rating:

Amazon Subscribe & Save - Unlock Great Deals, Enjoy Hassle-Free Shopping
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.

  • ①【SUNLU Neatly Wound Filament】SUNLU PETG 3D Printer Filament is neatly wound filament. Ensure the 100% clean rate with an excellent self-developed clean winding device.
  • ②【Strong PETG Filament 1.75】SUNLU 3D filament PETG 1.75 is a stiff, tough, high-performance material that offers excellent clarity, light transmission and high gloss. And it is very resistant to temperatures above 60°C(140°F).
  • ③【Stable Dimensional Tolerance】1.75mm PETG 3D filament, dimensional accuracy +/- 0.02mm. SUNLU PETG Filament has wide compatibility of 3D printers due to high precision tolerance and perfect roundness on the whole 1kg spool.
  • ④【Vacuum Sealed Package】SUNLU 1kg PETG filament comes in a sealed vacuum bag with desiccant bag. It makes it easy to keep 3D printer filaments in optimal storage condition and free from dust or debris before opening the vacuum-sealed packaging.
  • ⑤【Recommended Printing Settings】: For PETG 3D printer filament, we recommend printing at a nozzle temperature of 220-250℃(428-482℉), a bed temperature of 75-85℃(167-185℉), and a print speed of 50 -100mm/s.
Note: This is not an advertisement; we are dedicated to promoting items to assist people in finding deals quickly and efficiently, ultimately saving them money. Explore and test market all the latest deals and promotions conveniently gathered in one website for a seamless and money-saving shopping experience.